.jpg)
AHT20, as a new generation of temperature and humidity sensors, has established a new standard in size and intelligence. It is embedded in a double row flat no-lead package suitable for reflow soldering, with a bottom of 3 x 3 mm and a height of 1.0 mm. The sensor outputs calibrated digital signals in standard IAHT20, as a new generation of temperature and humidity sensors, has established a new standard in size and intelligence. It is embedded in a double row flat no-lead package suitable for reflow soldering, with a bottom of 3 x 3 mm and a height of 1.0 mm. The sensor outputs calibrated digital signals in standard I2C format.AHT20 is equipped with a newly designed ASIC chip, an improved MEMS semiconductor capacitive humidity sensing element and a standard on-chip temperature sensing element. As a result, the performance of the new generation of temperature and humidity sensors has greatly improved or even exceeded that of the previous ones with more stability in harsh environments. Each sensor is calibrated and tested, with product batch number printed on the surface of the product. Due to the improvement and miniaturization of the sensor, its cost-effective ratio is higher, and finally all equipment will benefit from the cuttingedge energy-saving operation mode.
More Introduction >>
AHT15 temperature and humidity sensors use standard pitch plug connectors for easy replacement in applications. In terms of protective performance, AHT15 uses PTFE film with waterproof and dust-proof performance without affecting RH signal response time.Therefore, it allows the sensor to be used in severe environmental conditions to ensure the best accuracy performance, making AHT15 the best choice in the most demanding application conditions. Each sensor is rigorously calibrated and tested. Because of improved sensors and miniaturization, it is more cost-effective.
More Introduction >>
AHT10 is a high precision, fully calibrated, patch packaged temperature and humidity sensor fabrication process to ensure that the product has extremely high reliability and excellent long-term stability.The sensor includes a capacitive humidity sensor and a high performance CMOS microprocessor.The product has excellent quality, super-fast response, strong anti-interference ability, high cost-performance ratio and so on.
More Introduction >>
AM2105A digital temperature and humidity module is a kind of sensor with calibrated digital signal output. It adopts special digital module acquisition technology and temperature and humidity sensing technology to assure the product high reliability and excellent long-term stability. It consists of a capacitive moisture sensing element and a high precision integrated temperature measuring element connected with a high performance microprocessor. AM2105A communication mode adopts single bus communication mode and standard single bus interface, making system integration easy and quick. Its ultra-small size, extremely low power consumption and signal transmission distance of more than 20 meters make it the best choice for all kinds of applications and even the most demanding applications. The users can obtain the accurate temperature and humidity information without calculating the digital output twice and compensating the temperature of humidity.
More Introduction >>
DHT10 is equipped with a newly designed ASIC chip, an improved MEMS semiconductor capacitive humidity sensor and a standard on-chip temperature sensor. Its performance has greatly improved or even exceeded the reliability level of the previous generation of sensors. The new generation of temperature and humidity sensors have been improved to make their performance more stable in harsh environments. Each sensor is strictly calibrated and tested. Because of the improvement and miniaturization of the sensor, its cost-effective ratio is higher.
More Introduction >>
AM2311A Digital Temperature and Humidity Module is a temperature and humidity composite sensor with its calibrated digital signal output.It applies special digital module acquisition technology and temperature and humidity sensing technology,to ensure that the product has high reliability and excellent long-term stability.The product has the advantages of excellent quality, ultra-fast response, strong anti-interference ability and high cost performance.Each sensor is calibrated in an extremely accurate humidity calibration laboratory.Calibration coefficients are stored in the form of program in the single chip computer. These calibration coefficients are called in the process of processing the detection signal inside the sensor. Standard single bus interface makes system integration easy and fast.Standard single bus interface makes system integration easy and fast. Ultra-small size, very low power consumption,Signal transmission distance can reach more than 20 meters, making it the best choice for all kinds of applications and even the most demanding applications. Products are cited as 3Wire (single bus interface) connection is convenient. Special encapsulation forms can be provided according to user's needs requirements.
More Introduction >>
AO-07 is the oxygen sensor of Aosong Electronics.Offering long life and fast response, the high quality AO-07 replacement sensor incorporates a molded body design, specific for medical use. Best of all, the AO-07 costs less than the sensors it replaces, creating additional saving while providing superior quality. For further information on the AO-07 or any product in ASAIR’s complete line of medical oxygen analyzers and sensors, contact us.
More Introduction >>
AGS02MA is a MEMS TVOC gas sensor with a calibrated digital signal output. It uses dedicated digital module acquisition technology and gas sensing sensing technology to ensure high reliability and excellent long-term stability. This MEMS gas sensor features low power consumption, high sensitivity, fast response, high reliability and stability, low cost, and simple drive circuit.
More Introduction >>.jpg)
The response time of the ADP1108-R has been optimized for medical ventilation applications. Mounted in a rugged, chemically inert PPS housing the ADP1108-R differential pressure sensors feature a unique dynamic range, zero offset and unsurpassed long term stability. This makes it an ideal fit for demanding yet cost sensitive OEM applications in medical and HVAC equipment. The ADP1108-R is supplied with 5.0 V and provides a 0.25~4.0 V output. Although the output of the sensor is analog, the internal linearization and temperature compensation is performed digitally. This results in a superior accuracy, outstanding resolution (up to 0.05 Pa), and lowest temperature dependence. Its leading performance is based on ASAIR proprietary ASAIR? sensor technology. The differential pressure is measured by a thermal sensing element. In contrast to other thermal differential pressure sensors only a very small amount of air is required. This leads to a reliable operation even under harsh conditions. In comparison to membrane and piezo-resistive based sensors the ADP1108-R differential pressure sensors show an extended measurement range, better offset stability and improved reproducibility even at lowest pressure ranges. In addition the ADP1108-R is robust against pressure bursts and shows no sensitivity to the mounting orientation.
More Introduction >>
The AFM3000 sensor is Aosong’s digital flow meter designed specifically for ventilator applications. It measures the flow rate of air, oxygen andother non-aggressive gases with superb accuracy. A special design of the flow channel results in the very low pressure drop through the flow body of the sensor making it extremely suitable for very demanding applications, such as medical ventilation and respiratory applications. The AFM3000 operates from a 5 Voltsupply voltage and features a digital I2C interface. The measurement results are internally linearized and temperature compensated. The outstanding performance of this sensor is based on Aosong’s sensor technology,which combines a thermal sensor chip and a high-performance integrated 24-bit AD acquisition CMOS microprocessor. The flow rate of the gas is measured by a thermal sensor element which assures very fast signal processing time and bidirectional measurement with best-in-class accuracy.
More Introduction >>
AFS01 is a highly accurate and fully calibrated micro-flow sensor for measuring non-corrosive gases, such as oxygen and nitrogen, which ensures high reliability and excellent long-term stability.The sensor includes a flow detection element and a high performance CMOS microprocessor with 24bitAD acquisition.The product has excellent quality, super-fast response, strong anti-interference ability, High quality and low price and so on.High integration, very suitable for high quality, mass production requirements, is an good choice for users, easy to partner manufacturers of OEM applications.
More Introduction >>
ASAIR Electronics provides high-precision flow sensors for industrial fields
2020-07-25The working principle of ASAIR differential pressure sensor
2020-07-22ASAIR Electronics provides a special differential pressure sensor for ventilator
2020-07-21ASAIR Chips Shines at US Sensors Expo & Conference 2019
2019-06-27Exhibiting Sensor Chips at USA Sensors Expo & Conference 2019
2019-06-14 (1).png)
.jpg)
